Automatic Stacker Double Belt Type Polyurethane Sandwich Panel Forming Machine For Making Roof & Wall Panels

   Description of PU Sandwich Panel Forming Machine   

• Sandwich panel, tpolyurethane sandwich panel, thermal insulation sandwich panels for wall and roof

 

• Sandwich Panel is made by Polyurethane hard foaming and PPGI.Polyurethane hard foaming material is recognized as the best thermal protecting material in the world and it is characteristic of low heat conductivity coefficient, good load-bearing performance, and high strength against bending.

 

• Sandwich Panel is a kind of base building material of industrial factory building, storage,warehouse,prefabricated house,refrigeration house.

 

• Sandwich Panel can be made to wall panel and roofing panel.It is good at insulating and sound-proof.It is difficult to burn,so it is one kind of safety building material.

   Main Technical Specifications   

1. (a) Thickness : roof steel panel 30-200mm and wall steel panel 30-200mm.

(b) PU foam density : 40±5 kg/m³

(c) Panel width : 50-1150mm

(d) Thickness of galvanizes color steel coil : 0.4mm~0.7mm

2. The production speed is different according to the panel thickness.

Recommended speed is 6M/min for 50mm thickness, 4M/min for 75mm thickness.

3. Speed of forming machine is 0~12m/min and adjustable. The length and amount of production can be set and count automatically by control panel.

4. Hydraulic material discharge stand can feed steel sheets automatically and keep accuracy during long time operation.

5. Caterpillar conveyor contains upper/lower construction and double-sided block belt. The effective thickness can be up to 200mm so it can provide a large variety of roof and wall products easily by changing the spec of the side blocks.

6. Bend saw cutter : Maximum thickness is 200mm. The suction channel is reserved for additional suction system to prevent the dust pollution.

7. The characteristic of this continuous rubber belt sandwich line is ALL parts including forming machine, lamination, conveyor, cutter and auto stacking equipment are synchronized by a central Ratio Setter control system. The user can easily control the speed through the main speed controller (VR).